F3147 System error channel 1
Cyclic test of monitoring functions of safety
technology channel 1 is faulty
Supported by Firmware Variant:
The operatability of safety monitoring functions is cyclically checked in
A system error occurred in channel 1. The drive is decelerated according
to the setting in P-0-0119, Best possible deceleration.
The drive automatically switches to safety related standstill and the output
stage is switched off via two channels.
As soon as the axis has stopped the safety door can be opened.
Reset module by switching control voltage on and off.
If error occurs repeatedly, replace firmware and/or
Only Rexroth service engineers are allowed to replace optional
modules of the control section.
Only Rexroth service engineers or especially trained users are
allowed to replace the control section. The replacement of the
entire drive controller is described in the Project Planning
Manual for the power section.
F3147 - Attributes