F2040 Device Overtemperature 2 Shutdown - Bosch Rexroth IndraDrive Troubleshooting Manual
Hide thumbs
Also See for Rexroth IndraDrive:
- Applications manual (100 pages) ,
- Project planning manual (128 pages) ,
- Instruction manual (26 pages)
Table of Contents
Rexroth IndraDrive
F2040 Device overtemperature 2 shutdown
Cause
Ambient temperature too high. Specified
performance data are valid up to an ambient
temperature of 40 C.
Heat sink of device is dirty
Convection is prevented by other components or
mounting position in control cabinet
Blower of device is defective
DOK-INDRV*-GEN-**VRS**-WA01-EN-P
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
Supported by Firmware Variant:
A switch-off value for the second temperature sensor is stored in
element 3 of parameter P-0-4059, Electric type data of power section.
If parameter P-0-0816, Amplifier temperature 2 exceeds the switch-off
value, the error F2040 is generated and the device is switched off.
Remedy
Reduce ambient temperature, e.g. by cooling the control
cabinet
Clean heat sink
Mount device vertically and provide sufficient space for
ventilating heat sink
Replace device
F2040 - Attributes
Display:
F2040
Mess. no.:
F2040 (hex)
Error Messages
FWA-INDRV*-MPH02VRS-MS
FWA-INDRV*-MPB02VRS-MS
FWA-INDRV*-MPD02VRS-MS
7-93
- Quick Links:
- Coded Diagnostic Drive Messages
- Error
Hide quick links:
Table of Contents
