F3145 Error When Unlocking The Safety Door - Bosch Rexroth IndraDrive Troubleshooting Manual
Hide thumbs
Also See for Rexroth IndraDrive:
- Applications manual (100 pages) ,
- Project planning manual (128 pages) ,
- Instruction manual (26 pages)
Table of Contents
7-70
Error Messages
F3145 Error when unlocking the safety door
Cause
Error in mechanical system of safety door
Error in wiring of safety door, e.g. short circuit
between I/O10n and 24 V or O10n and 0 V; driver at
output of O10n defective
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
Supported by Firmware Variant:
The drive is decelerated according to the setting in P-0-0119, Best
possible deceleration
- or -
the axis already is in "safety related standstill".
The output stage is switched off via two channels.
Remedy
Check mechanical system of safety door
Check wiring of safety door
Then start command S-0-0099, C0500 Reset class 1 diagnostics in
order to clear error and then set drive enable again.
F3145 - Attributes
Display:
F3145
Mess. no.:
F3145 (hex)
Rexroth IndraDrive
FWA-INDRV*-MPH02VRS-MS
FWA-INDRV*-MPB02VRS-MS
FWA-INDRV*-MPD02VRS-MS
DOK-INDRV*-GEN-**VRS**-WA01-EN-P
- Quick Links:
- Coded Diagnostic Drive Messages
- Error
Hide quick links:
Table of Contents
