4-4
Diagnostic Messages when Booting the Devices
Firmware update ?
Cause
Check showed that firmware on flash and on MMC
are not identical
Update Error !
Cause
Firmware update was not carried out correctly
Brief Description: Different firmware in device and on MMC
During the booting process with the MMC plugged in, a check is run by
means of the release version to find out whether the firmware (FW) on
the flash is identical to the one on the MMC.
Remedy
Switch drive off and install MMC in drive with the same
release version as on flash
– or –
Confirm diagnostic message with "ENTER" and start
firmware update
Brief Description: Firmware update error during booting process
Remedy
Reboot device and start firmware update
– or –
Switch drive off, remove MMC and carry out firmware
update on PC via auxiliary program "Dolfi"
Rexroth IndraDrive
DOK-INDRV*-GEN-**VRS**-WA01-EN-P