E2050 Device Overtemp. Prewarning - Bosch Rexroth IndraDrive Troubleshooting Manual
Hide thumbs
Also See for Rexroth IndraDrive:
- Applications manual (100 pages) ,
- Project planning manual (128 pages) ,
- Instruction manual (26 pages)
Table of Contents
Rexroth IndraDrive
E2050 Device overtemp. Prewarning
Cause
Amplifier overtemperature (heat sink) due to
overload of drive (overcurrent)
Ambient temperature too high. Specified
performance data are valid up to an ambient
temperature of 40 C
Heat sink of device is dirty
Convection is prevented by other components or
mounting position of control cabinet
Failure of internal blower
Failure of air conditioning for control cabinet
Incorrect dimensioning of control cabinet with regard
to heat discharge
DOK-INDRV*-GEN-**VRS**-WA01-EN-P
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
Supported by Firmware Variant:
Supported by Supply Unit:
The heat sink temperature of the device is monitored by a temperature
sensor and a temperature model. When the heat sink has become too
hot, the device is switched off in order to protect it against destruction.
Before the error F2018 Device overtemperature shutdown is triggered,
the warning E2050 Device overtemp. Prewarning is output.
Note:
When the warning E2050 appears, it is possible to stop the
axis via the control unit in accordance with the process (e.g.
terminate processing, leave collision area etc.) or to reduce
the load of the drive controller.
Remedy
Switch drive off and let it cool down, check mechanical
system as well as drive dimensioning (working power
mustn't exceed, on average, continuous power of drive)
Reduce ambient temperature, e. g. by cooling the
control cabinet
Clean heat sink
Mount device vertically and provide sufficient space for
ventilating heat sink
If blower fails, replace device or power section
Check air conditioning of control cabinet
Check dimensioning of control cabinet
See also Functional Description "Current Limitation"
E2050 - Attributes
Display:
E2050
Mess. no.:
E2050 (hex)
Warning Diagnostic Messages (Exxxx)
FWA-INDRV*-MPH02VRS-MS
FWA-INDRV*-MPB02VRS-MS
FWA-INDRV*-MPD02VRS-MS
HMV01
8-25
- Quick Links:
- Coded Diagnostic Drive Messages
- Error
Hide quick links:
Table of Contents
