Bosch Rexroth IndraDrive Troubleshooting Manual page 225
Hide thumbs
Also See for Rexroth IndraDrive:
- Applications manual (100 pages) ,
- Project planning manual (128 pages) ,
- Instruction manual (26 pages)
Table of Contents
7-130
Error Messages
Error code
0x6005
0x7002
0x7003
0x7004
0x7005
0x7006
0x7007
0x7008
0x7009
0x700A
0x700B
0x700C
0x7010
0x7011
0x7012
0x7013
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
Explanation
maximum input value presently write protected
data transmission too short
data transmission too long
data cannot be changed
data presently write protected
data smaller than minimum input value
data greater than maximum input value
data not correct
data password protected
Operation data is write protected, it is configured cyclically
Invalid indirect addressing
(e.g. data container, list handling)
Operation data is write protected, due to other settings
(e.g., parameter, operation mode, drive enable, drive on etc.)
procedure command already active
procedure command not interruptible
procedure command at this time not executable
(e.g., in this phase the procedure command cannot be activated)
procedure command not executable (invalid or false parameters)
Fig. 7-1:
Error specification per SERCOS
Rexroth IndraDrive
DOK-INDRV*-GEN-**VRS**-WA01-EN-P
- Quick Links:
- Coded Diagnostic Drive Messages
- Error
Hide quick links:
Table of Contents
