F2010 Error When Initializing Digital Inputs/Outputs; F2011 Plc - Error Nr. 1 - Bosch Rexroth IndraDrive Troubleshooting Manual
Hide thumbs
Also See for Rexroth IndraDrive:
- Applications manual (100 pages) ,
- Project planning manual (128 pages) ,
- Instruction manual (26 pages)
Table of Contents
7-80
Error Messages
F2010 Error when initializing digital inputs/outputs
Cause
Conflict with last stored parameters of digital
inputs/outputs
F2011 PLC - Error nr. 1
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
F2009 - Attributes
Display:
PL
Mess. no.:
F2009 (hex)
Supported by Firmware Variant:
An error occurred during the first initialization of the drive (initialization of
digital inputs/outputs).
Remedy
Check following parameter contents and correct them, if
necessary:
- P-0-0300, Digital I/Os, assignment list
- P-0-0301, Digital I/Os, bit numbers
- P-0-0302, Digital I/Os, direction
F2010 - Attributes
Display:
F2010
Mess. no.:
F2010 (hex)
Supported by Firmware Variant:
In conjunction with technology functions the PLC integrated in the drive
(optional expansion package "drive PLC") allows the user generating error
messages (F2011...F2014) within the PLC program.
The causes of the error are depending on the respective PLC project (or
the active technology function). If the error message is generated by a
technology function made available by Bosch Rexroth, the causes and
remedies are contained in the description of the technology function.
See also documentation "Rexroth IndraMotion MLD-S"
F2011 - Attributes
Display:
F2011
Mess. no.:
F2011 (hex)
Rexroth IndraDrive
FWA-INDRV*-MPH02VRS-MS
FWA-INDRV*-MPB02VRS-MS
FWA-INDRV*-MPD02VRS-MS
FWA-INDRV*-MPH02VRS-MS
DOK-INDRV*-GEN-**VRS**-WA01-EN-P
- Quick Links:
- Coded Diagnostic Drive Messages
- Error
Hide quick links:
Table of Contents
