On-Board Connection Points - Bosch Rexroth IndraDrive CsDrive System with HCS01 Project Planning Manual
Hide thumbs
Also See for Rexroth IndraDrive CsDrive System with HCS01:
- Instruction manual (68 pages)
Table of Contents
DOK-INDRV*-HCS01******-PR05-EN-P
Rexroth IndraDrive CsDrive Systems with HCS01
6.2.3
On-board connection points
Connection of Equipment Grounding Conductor
X31
Digital inputs, digital output
X32
Analog input
X37
Digital inputs/outputs (DA option)
X38
Analog inputs/outputs (DA option)
X41, X42, X43 Safety technology (S4, S5 option: Safe Motion)
X47
Bb relay contact, module bus (module bus at HCS01.1E-
W00xx-x-03 devices only)
X49
Safety technology (L3 option: Safe Torque Off; L4 option:
Safe Torque Off, Safe Brake Control)
X61
CANopen communication (CN option)
X77
DC bus connection (at HCS01.1E-W00xx-x-03 devices only);
DC bus connector optionally available (if the DC bus connec‐
tor is not used, the DC bus connection must be covered with
the supplied touch guard)
Fig. 6-4:
HCS01 connection points
WARNING
●
Before switching on and before commissioning, ground or connect the
components of the electric drive and control system to the equipment
grounding conductor at the grounding points.
●
Connect the equipment grounding conductor of the components of the
electric drive and control system permanently to the main power supply
at all times. The leakage current is greater than 3.5 mA.
●
Establish an equipment grounding connection with a copper wire of a
cross section of at least 10 mm
equipment grounding conductor of the same cross section as the origi‐
nal equipment grounding conductor.
WARNING
Exclusively operate the device
●
with plugged on connectors (even if there haven't been any lines con‐
nected to the connectors) and
●
with connected equipment grounding conductor!
Bosch Rexroth AG
Mounting and installation
High housing voltage and high leakage cur‐
rent! Danger to life, risk of injury by electric
shock!
2
(8 AWG) or additionally run a second
Lethal electric shock by live parts with more
than 50 V!
127/341
- Quick Links:
- Hap01 Control Panel
Hide quick links:
Table of Contents
