Table of Contents
7.5.4 Installing the planetary gearbox with axial-piston motor connection (axial-
piston motor is not included in the scope of supply)
Failure or damage to the planetary gearbox!
If you install the planetary gearbox in any other installation position than the one
permitted by Rexroth, the planetary gearbox may be damaged or fail. The
warranty claim lapses!
Only install the planetary gearbox in the installation position approved by
Rexroth as indicated in the dimensioned drawing in appendix D "Technical
data / Drawings" of the material number-specific operating instructions.
Observe the operating instructions of the axial-piston motor manufacturer (not
included in the scope of supply). This is where you will find all the required
information on assembly and commissioning of the axial-piston motor.
If the planetary gearbox is delivered without the axial-piston motor, install as
follows:
• Assemble the planetary gearbox to the machine or chassis frame.
• Then assemble the axial-piston motor to the planetary gearbox.
Procedure
Assembling the planetary gearbox at/in the machine or chassis frame.
1
For installation, strictly observe the corresponding data in the dimensioned
drawing of the planetary gearbox in appendix D "Technical data / Drawings" of
the material number-specific operating instructions.
2
Also observe the primary operating instructions of the machine or vehicle and
the manufacturer's frame drawing.
3
For the planetary gearbox weight, refer to appendix D "Technical data /
Drawings" of the material number-specific operating instructions.
4
Transport the planetary gearbox to the application machine.
5
Make sure that the surface is stable.
6
Place the planetary gearbox with the cover plate down on two suitable squared
timbers. Secure the planetary gearbox against tipping over.
7
Attach the planetary gearbox carefully using appropriate means of attachment
e.g. eye bolts, swivel hooks, shackles or suitable equipment on an appropriate
lifting equipment such as a crane hook. Observe chapter 6.1 "Transporting the
HYDROTRAC GFT 8000".
Tighten the means of attachment without lifting the planetary gearbox.
8
9
Make sure that the part of the machine or chassis frame to which the planetary
gearbox is to be mounted is free of dirt and foreign objects.
10
Lift the planetary gearbox into the machine or chassis frame.
RE 79022-01-B/04.2020, General Operating Instructions HYDROTRAC GFT 8000 series 40, Bosch Rexroth AG
CAUTION
Assembly
33/70
Table of Contents
