Table of Contents
Sytronix SvP 7030 IMC
36 / 186
Transporting the Sytronix system
● Always maintain the ambient conditions during storage and transport speci-
● Use suitable shock absorbers if major shocks may occur during transport.
● Close the packaging according to the condition as supplied if it must be
● If possible, do not remove the packaging until immediately before the
6.2.1
Handling the motor-pump unit with cranes or similar lifting gear
Transport with cranes and similar lifting gear may only be carried out using
suitable slings such as lifting straps, belts and chains. At delivery, the motor-
pump unit is provided with lifting points on the pump and on the motor, see
the following table:
Table 12: Lifting points
Component
MS2N10
MS2N13
PGH4-3X/
PGH5-3X/
PGM4-4X/
For detailed information about the carrying capacity of the ring screws, refer to
standard DIN 580.
● For lifting, use the provided positions or lifting points.
● Always fasten the lifting means at 2 lifting points at the motor-pump unit.
● Slowly and carefully lift and lower the motor-pump unit.
Fig. 6: Handling MPA02
Bosch Rexroth AG
fied in the data sheets of the components (see table ⮫ Chapter 1.2
"Required and supplementary documentation" on page 7).
opened for checking reasons.
assembly.
Never lift the motor-pump unit at one lifting point only.
Lifting eye bolts DIN 580
2 x M8
2 x M10
1 x M8
1 x M10
1 x M8
RE 62312-B, 03.2022
Table of Contents
