X9, Integrated/External Braking Resistor - Bosch Rexroth IndraDrive CsDrive System with HCS01 Project Planning Manual
Hide thumbs
Also See for Rexroth IndraDrive CsDrive System with HCS01:
- Instruction manual (68 pages)
Table of Contents
DOK-INDRV*-HCS01******-PR05-EN-P
Rexroth IndraDrive CsDrive Systems with HCS01
X9, integrated/external braking resistor
Function
Connection (HCS01.1E-W0003...
W0028)
Connection (HCS01.1E-W0054)
Notes on installation
WARNING
Exclusively operate the device
●
with plugged on connectors (even if there haven't been any lines con‐
nected to the connectors) and
●
with connected equipment grounding conductor!
X9 is used to connect the integrated or external braking resistor HLR. By
means of an internal switch, the braking resistor is connected to the DC bus.
Parameterize the external braking resistor by means of the firm‐
ware to protect the drive controller and the braking resistor
against overload:
●
P-0-0860, Converter configuration
●
P-0-0858, Data of external braking resistor
Fig. 6-7:
Connecting the braking resistor (HCS01.1E-W0003...W0028)
Fig. 6-8:
Connecting the braking resistor (HCS01.1E-W0054)
Maximum allowed line length to external braking resistor: 5 m
Twist unshielded lines.
Bosch Rexroth AG
Mounting and installation
Lethal electric shock by live parts with more
than 50 V!
141/341
- Quick Links:
- Hap01 Control Panel
Hide quick links:
Table of Contents
