Table of Contents
DOK-INDRV*-SI3-**VRS**-AP06-EN-P
Rexroth IndraDrive Integrated Safety Technology "Safe Torque Off" (as of MPx-16)
3.2.3
Hazards by improper use
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
●
Applications for functional safety are only allowed if clearly and explicitly
specified
in
the
Technology". If this is not the case, they are excluded. Functional safety
is a safety concept in which measures of risk reduction for personal
safety depend on electrical, electronic or programmable control
systems.
●
The information given in the application documentation with regard to
the use of the delivered components contains only examples of
applications and suggestions.
The machine and installation manufacturers must
–
make sure that the delivered components are suited for their
individual application and check the information given in this
application documentation with regard to the use of the
components,
–
make sure that their individual application complies with the
applicable safety regulations and standards and carry out the
required measures, modifications and complements.
●
Commissioning of the delivered components is only allowed once it is
sure that the machine or installation in which the components are
installed complies with the national regulations, safety specifications and
standards of the application.
●
Operation is only allowed if the national EMC regulations for the
application are met.
●
The instructions for installation in accordance with EMC requirements
can be found in the section on EMC in the respective application
documentation.
The machine or installation manufacturer is responsible for compliance
with the limit values as prescribed in the national regulations.
●
The technical data, connection and installation conditions of the
components are specified in the respective application documentations
and must be followed at all times.
National regulations which the user has to comply with
●
European countries: In accordance with European EN standards
●
United States of America (USA):
–
National Electrical Code (NEC)
–
National Electrical Manufacturers Association (NEMA), as well as
local engineering regulations
–
Regulations of the National Fire Protection Association (NFPA)
●
Canada: Canadian Standards Association (CSA)
●
Other countries:
–
International Organization for Standardization (ISO)
–
International Electrotechnical Commission (IEC)
●
High electrical voltage and high working current! Danger to life or
serious injury by electric shock!
●
High electrical voltage by incorrect connection! Danger to life or injury by
electric shock!
Bosch Rexroth AG
Safety instructions for electric drives and controls
application
documentation
15/149
"Integrated
Safety
Hide quick links:
Table of Contents
