Engine Electrical Devices; Repair Instructions; Engine Control Module (Ecm) Removal And Installation - Suzuki SX4 Service Manual
Hide thumbs
Also See for SX4:
- Owner's manual (47 pages) ,
- Owner's manual (18 pages) ,
- Owner's manual (278 pages)
Table of Contents
1C-1 Engine Electrical Devices:
Engine Electrical Devices
Engine
Engine Control Module (ECM) Removal and
Installation
CAUTION
!
As ECM consists of precision parts, be
careful not to expose it to excessive shock.
Removal
1) Disconnect negative cable at battery.
2) Disconnect connectors from ECM as follows.
a) Push lock (1) to release locking of lock lever (2).
b) Turn lock lever to arrow direction until it stops.
1
3) Remove ECM (1) from its bracket by removing its
mounting bolts (2).
2
Repair Instructions
S7RW0A1306001
2
I4RS0A130003-01
1
2
I5RW0A130001-01
Installation
Reverse removal procedure noting the following:
• Tighten ECM mounting bolts to specified torque.
Tightening torque
ECM mounting bolt (a): 8 N·m (0.8 kgf-m, 6.0 lb-
ft)
(a)
• Connect connectors to ECM as follows.
a. Make sure that lock lever of ECM connector is
unlock position.
b. Insert ECM connectors to ECM until it stops with
unlocked lock lever.
c. Lock ECM connectors securely by pulling its lock
lever up.
(a)
I5RW0A130002-01
I4RS0B130021-01
I4RS0B130022-01
I4RS0A130004-01
Chapters
Table of Contents
Troubleshooting
