Hvac Control Unit Removal And Installation - Suzuki SX4 Service Manual
Hide thumbs
Also See for SX4:
- Owner's manual (47 pages) ,
- Owner's manual (18 pages) ,
- Owner's manual (16 pages)
Table of Contents
HVAC Control Unit Removal and Installation
Removal
1) Disconnect negative (–) cable at battery.
2) Remove steering column hole cover from instrument
panel.
3) Remove audio unit from instrument panel referring to
"Audio Unit Removal and Installation (If Equipped) in
Section 9C".
4) Remove driver side foot duct (1) from HVAC unit by
removing screw (2).
1
5) Disconnect temperature control cable (1) and air
flow control cable (2) from HVAC unit (3).
LH steering vehicle
S7RW0A7106009
2
6) Remove center garnish from instrument panel.
7) Remove HVAC control unit from instrument panel.
8) Disconnect connectors from HVAC control unit.
I7RW01710010-01
Installation
Reverse removal procedure noting the following
instructions.
• Connect temperature control cable and air flow control
cable of HVAC control unit to links of HVAC unit.
a. For LH steering vehicle, set airflow selector (1) to
"DEF" position and temperature selector (2) to
"MAX HOT" position.
For RH steering vehicle, set airflow selector (1) to
"VENT" position and temperature selector (2) to
"MAX COOL" position.
I7RW01710012-02
Heater and Ventilation:
RH steering vehicle
F: Vehicle forward
2
2
7A-7
I6RW0C710005-01
1
I4RS0B710013-01
1
I4RS0A710016-01
Chapters
Table of Contents
Troubleshooting
