Suzuki SX4 Service Manual page 301
Hide thumbs
Also See for SX4:
- Owner's manual (47 pages) ,
- Owner's manual (16 pages) ,
- Owner's manual (278 pages)
Table of Contents
25) Remove engine right mounting bracket (1) and
engine left mounting bush bolt (2).
1
26) Remove suspension frame mounting bolts and (1)
front lower cross member bolts (2).
2
I5RW0C140012-01
2
1
I5RW0A140014-01
27) Lower engine with transaxle, front suspension frame,
front lower cross member, transfer (for 4WD model)
and steering gear case.
CAUTION
!
Before lowering engine, in order to avoid
damage to A/C compressor, make clearance
by rising it.
28) Disconnect steering gear case from suspension
frame referring to "Steering Gear Case Assembly
Components in Section 6C", if necessary.
29) Disconnect transfer from suspension frame referring
to "Transfer Dismounting and Remounting in Section
3C", if necessary.
30) Disconnect transaxle from engine referring to
"Manual Transaxle Unit Dismounting and
Remounting in Section 5B" or "Automatic Transaxle
Unit Dismounting and Remounting in Section 5A", if
necessary.
31) Remove clutch cover and clutch disk referring to
"Clutch Cover, Clutch Disc and Flywheel Removal
and Installation in Section 5C", if necessary.
Installation
1) Install clutch cover and clutch disk referring to
"Clutch Cover, Clutch Disc and Flywheel Removal
and Installation in Section 5C", if removed.
2) Connect transaxle to engine referring to "Manual
Transaxle Unit Dismounting and Remounting in
Section 5B" or "Automatic Transaxle Unit
Dismounting and Remounting in Section 5A", if
removed.
3) Connect transfer to suspension frame referring to
"Transfer Dismounting and Remounting in Section
3C", if removed.
4) Connect steering gear case to suspension frame
referring to "Steering Gear Case Assembly
Components in Section 6C", if removed.
5) Lift engine with transaxle, front suspension frame,
front lower cross member, transfer and steering gear
case into engine compartment with jack.
CAUTION
!
Before lifting engine, in order to avoid
damage to A/C compressor, make clearance
by rising it.
Engine Mechanical:
1D-19
Chapters
Table of Contents
Troubleshooting
