Suzuki SX4 Service Manual page 57
Hide thumbs
Also See for SX4:
- Owner's manual (47 pages) ,
- Owner's manual (16 pages) ,
- Owner's manual (278 pages)
Table of Contents
In the 2nd through the 4th frames, the freeze frame data of each malfunction is stored in the order as each malfunction
is detected. These data are not updated.
Shown in the table are examples of how freeze frame data are stored when two or more malfunctions are detected.
Malfunction detected order
No malfunction
P0401 (EGR)
1
detected
P0171 (Fuel system)
2
detected
P0300 (Misfire)
3
detected
P0301 (Misfire)
4
detected
Freeze frame data clearance:
The freeze frame data is cleared at the same time as clearance of DTC.
Non-Euro-OBD Model
ECM diagnosis troubles which may occur in the area
including the following parts when the ignition switch is
ON and the engine is running, and indicates the result by
turning on malfunction indicator lamp (MIL) (1).
• Heated oxygen sensor-1
• Heated oxygen sensor-2
• ECT sensor
• TP sensor
• Throttle actuator
• MAF sensor
• IAT sensor
• CMP sensor
• CKP sensor
• Knock sensor
• Wheel speed sensor
• CPU (Central Processing Unit) of ECM
• APP sensor
• Oil control valve (VVT model)
• Barometric pressure sensor
• A/C refrigerant pressure sensor
• ECM backup power supply
• Fuel level sensor
• CAN
ECM and MIL operate as follows.
• MIL lights when the ignition switch is turned ON (but
the engine at stop) with the diagnosis switch terminal
ungrounded regardless of the condition of Engine and
Emission control system. This is only to check MIL in
the combination meter and its circuit.
• If the above areas of Engine and Emission control
system is free from any trouble after the engine start
(while engine is running), MIL turns OFF.
Frame 1
Freeze frame data to
be updated
No freeze frame data
Data at P0401
Data at P0401
detection
detection
Data at P0171
Data at P0401
detection
detection
Data at P0171
Data at P0401
detection
detection
Data at P0171
Data at P0401
detection
detection
Engine General Information and Diagnosis:
Frame
Frame 2
1st freeze frame
2nd freeze frame
data
Data at P0171
detection
Data at P0171
detection
Data at P0171
detection
• When ECM detects a trouble which has occurred in
the above areas, it makes MIL turn ON while the
engine is running to warn the driver of such
occurrence of trouble and at the same time it stores
the trouble area in ECM back-up memory. (The
memory is kept as it is even if the trouble was only
temporary and disappeared immediately. And it is not
erased unless the power to ECM is shut off for
specified time or it is cleared by SUZUKI scan tool
(SUZUKI-SDT) (2).)
For further detail of the checking / clearing procedure,
refer to "DTC Check" or "DTC Clearance".
3
3. DLC
Frame 3
Frame 4
3rd freeze frame
data
data
—
—
—
Data at P0300
detection
Data at P0300
detection
1
2
I5RW0C110001-01
1A-7
Chapters
Table of Contents
Troubleshooting
