Propeller Shaft; Precautions; Propeller Shaft Caution; General Description - Suzuki SX4 Service Manual
Hide thumbs
Also See for SX4:
- Owner's manual (47 pages) ,
- Owner's manual (278 pages) ,
- Owner's manual (18 pages)
Table of Contents
3D-1 Propeller Shaft:
Propeller Shaft
Driveline / Axle
Propeller Shaft Caution
CAUTION
!
• All propeller shaft fasteners are an important attaching part in that it could affect the performance of
vital parts and systems, and/or could result in major repair expense. They must be replaced with one
of the same part number or with an equivalent part if replacement becomes necessary. Do not use a
replacement part of lesser quality or substitute design. Torque values must be used as specified
during reassembly to assure proper retention of this part.
• Never attempt to heat, quench or straighten any propeller shaft part. Replace it with a new part, or
damage to the part may result.
Propeller Shaft Construction
Universal joints and ball joint require no maintenance. They are lubricated for life and can not be lubricated on the
vehicle. If a universal joint becomes noisy or worn, it must be replaced.
The propeller shaft is a balanced unit. Handle it carefully so that balance can be maintained.
1. Propeller shaft flange bolt
2. Center support nut
3. Propeller shaft assembly
Propeller Shaft Symptom Diagnosis
Condition
Abnormal noise
Vibration
Precautions
General Description
3
1
(a)
Diagnostic Information and Procedures
Possible cause
Loose propeller shaft flange bolt and/or
center support nut
Spider bearing worn out or stuck
Wear spider
Deformed propeller shaft
2
(b)
: 23 N⋅m (2.3 kgf-m, 17.0 lb-ft)
: 55 N⋅m (5.5 kgf-m, 40.0 lb-ft)
Correction / Reference Item
Tighten propeller shaft flange bolt and/or
center support nut.
Replace propeller shaft.
Replace propeller shaft.
Replace.
S7RW0A3400001
S7RW0A3401001
1
(a)
I5RW0A340004-01
S7RW0A3404001
Chapters
Table of Contents
Troubleshooting
