Water Pump Inspection; Specifications; Tightening Torque Specifications; Special Tools And Equipment - Suzuki SX4 Service Manual
Hide thumbs
Also See for SX4:
- Owner's manual (47 pages) ,
- Owner's manual (18 pages) ,
- Owner's manual (16 pages)
Table of Contents
1F-12 Engine Cooling System:
Water Pump Inspection
CAUTION
!
Do not disassemble water pump.
If any repair is required on pump, replace it
as assembly.
Rotate water pump by hand to check for smooth
operation. If pump does not rotate smoothly or makes
abnormal noise, replace it.
Tightening Torque Specifications
Fastening part
Radiator support bracket bolt
Generator bracket bolt
Generator pivot bolt
Generator adjusting bolt
Water pump bolt and nut
NOTE
The specified tightening torque is also described in the following.
"Cooling System Components"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".
Recommended Service Material
Material
Water tight sealant
S7RW0A1606018
Specifications
Tighten 7.0 N⋅m (0.7 kgf-m, 5.0 lb-ft) by the
specified procedure.
Special Tools and Equipment
SUZUKI recommended product or Specification
SUZUKI Bond No.1207F
Tightening torque
N⋅m
kgf-m
33
3.3
25
2.5
50
5.0
25
2.5
P/No.: 99000–31250
I2RH0B160019-01
S7RW0A1607001
Note
lb-ft
24.0
18.0
36.0
18.0
S7RW0A1608001
Note
Chapters
Table of Contents
Troubleshooting
