Inspection Of P/S Control Module And Its Circuits - Suzuki SX4 Service Manual
Hide thumbs
Also See for SX4:
- Owner's manual (47 pages) ,
- Owner's manual (278 pages) ,
- Owner's manual (18 pages)
Table of Contents
6C-30 Power Assisted Steering System:
Inspection of P/S Control Module and Its Circuits
The P/S control module and its circuits can be checked at the P/S control module wiring couplers by measuring
voltage and resistance.
CAUTION
!
P/S control module cannot be checked by itself. It is strictly prohibited to connect voltmeter or
ohmmeter to the P/S control module with connectors disconnected from the P/S control module.
Voltage Check
1) Remove console box.
2) Check for voltage at each terminal with connectors connected to the P/S control module.
NOTE
As each terminal voltage is affected by the battery voltage, confirm if the battery voltage is 11 V or
more when ignition switch is ON.
[A]: P/S control module connector No.1 "E11" (viewed from harness side)
[B]: P/S control module connector No.2 "E13" (viewed from harness side)
[C]: P/S control module connector No.3 "E12" (viewed from harness side)
[A]
11
12 13 14 15 16 17 18 19 20
1
2
3
4
5
6
7
8
[C]
1
2
9
10
S7RW0A6304020
[B]
1
2
I7RW01632020-01
Chapters
Table of Contents
Troubleshooting
