Select Lever Components; Select Lever Assembly Removal And Installation; Select Lever Knob Installation - Suzuki SX4 Service Manual
Hide thumbs
Also See for SX4:
- Owner's manual (47 pages) ,
- Owner's manual (16 pages) ,
- Owner's manual (18 pages)
Table of Contents
5A-86 Automatic Transmission/Transaxle:
5) Lower vehicle and pour proper amount of SUZUKI
ATF 3317 or Mobil ATF 3309.
6) Check fluid level referring to "A/T Fluid Level Check".
Automatic transaxle fluid
: SUZUKI ATF 3317 or Mobil ATF 3309
Automatic transaxle fluid capacity
When draining from drain plug hole: 2.6 liters
(5.49 / 4.58 US/Imp. pt.)
When overhauling: 5.8 liters (12.26 / 10.21 US/
Imp. pt.)
1
5
1. Fluid level gauge
2. "FULL HOT" mark
3. "LOW HOT" mark
Select Lever Components
4
1. Shift lock solenoid
2. Select lever assembly
4
3
2
1
I5RW0C510027-01
4. "FULL COLD" mark
5. "LOW COLD" mark
S7RW0A5106004
1
3
2
I5RW0C510028-04
3. Connector
4. "3" position switch
Select Lever Assembly Removal and
Installation
Remove and install select lever referring to "Select Lever
Components".
When installing select lever nothing the following.
• After installing select lever assembly, adjust select
cable referring to "Select Cable Adjustment".
Select Lever Knob Installation
Screw select lever knob onto select lever by specified
numbers of rotation below.
Rotation numbers for select lever knob installation
(a): 11 – 12 rotations
CAUTION
!
When installing select lever knob, do not turn
more than specified numbers of rotation.
Otherwise select lever knob is damaged.
S7RW0A5106005
S7RW0A5106006
1, (a)
I5RW0C510030-01
Chapters
Table of Contents
Troubleshooting
