Suzuki SX4 Service Manual page 552
Hide thumbs
Also See for SX4:
- Owner's manual (47 pages) ,
- Owner's manual (18 pages) ,
- Owner's manual (16 pages)
Table of Contents
3C-13 Transfer:
2) Press-fit outer races (front and rear) by using special
tool and hydraulic press.
Special tool
(A): 09913–75520
3) Press-fit front taper roller bearing (1) by using
special tool and hydraulic press.
Special tool
(A): 09925–18011
4) Install bevel pinion with new pinion shaft spacers (1)
and new pump seal (2) to transfer output retainer (3).
1
(A)
I5RW0A330038-01
(A)
1
I5RW0A330039-01
3
2
I5RW0A330040-02
5) Drive in rear taper roller bearing by using special tool
and tapping lightly with plastic hammer.
Special tool
(A): 09913–84510
6) Apply grease to new oil seal lip.
"A": Grease 99000–25010 (SUZUKI Super
Grease A)
7) Drive in oil seal (1) by using special tools and
hammer.
Special tool
(A): 09940–54910
(B): 09913–76010
Transfer output flange oil seal installing depth
"a": 21.0 – 22.0 mm (0.82 – 0.86 in.)
1, "A"
(A)
I5RW0A330041-02
(B)
"a"
(A)
I5RW0A330042-02
Chapters
Table of Contents
Troubleshooting
