Table of Contents
MUFFLER INSTALLATION
1. Install the muffler studs into the mounting grommets
on the chassis.
2. Install a new muffler gasket and install the three
fasteners retaining the muffler to the exhaust pipe.
Torque fasteners to specification.
TORQUE
Exhaust Pipe Fasteners:
18 ft-lb (24 Nm)
3. Install the two muffler springs.
4. Install the rear fascia / muffler cover. Torque fasteners
to specification
TORQUE
Rear Fascia / Muffler Cover Screws:
8 ft-lb (11 Nm)
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
© Copyright Polaris Industries Inc.
ENGINE / COOLING SYSTEM
EXHAUST PIPE REMOVAL
1. Lift and secure the vehicle.
2. Remove the right rear shock assembly.
3. Disconnect and remove the oxygen sensor
4. Remove the three fasteners
the exhaust pipe.
3
w
.
e
retaining the muffler to
3.17
Chapters
Table of Contents
Troubleshooting
