Table of Contents
s
19. Install dowel pins
into oil pump mounting holes.
d
20. Install the three bolts
crankcase. Torque mounting bolts to specification.
TORQUE
Oil Pump Mounting Bolts:
7 ft-lbs (10 Nm)
21. Reinstall oil pump pick-up
g
to specification.
TORQUE
Oil Pump Pick-Up Retaining Screw:
7 ft-lb (10 Nm)
22. Clean the gasket sealing surfaces on oil sump cover
and crankcase to remove old gasket material and any
oil.
NOTE
Gasket surfaces must be DRY and oil free. Use care
upon assembly to keep oil away.
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
© Copyright Polaris Industries Inc.
that retain oil pump to the
f
. Torque mounting screw
ENGINE / COOLING SYSTEM
23. Apply a thin, continuous film of Crankcase Sealant
(2871557) to sump cover mating surface and install
h
the oil sump cover
onto the crankcase.
IMPORTANT
Do not allow sealant to dry before assembly.
j
24. Install the thirteen M6
k
retain the oil sump cover
3
and three M8 bolts that
to the crankcase.
3.93
Chapters
Table of Contents
Troubleshooting
