Table of Contents
ENGINE / COOLING SYSTEM
13. Remove the two fasteners
to the exhaust pipe / turbo joint.
14. Remove the four fasteners
pipe to the turbocharger.
15. Remove the exhaust pipe from the chassis.
16. Remove the two hoses
boost control valve.
3.50
y
retaining the heat shield
u
retaining the exhaust
o
from the turbo going to the
17. Remove the banjo bolt
and remove the oil drain hose
IMPORTANT
The oil line sealing washers MUST be replace any time
the oil line/fitting is removed. Use only the
recommended washers shown in the Polaris Electronic
Parts Catalog.
18. Remove the fasteners
the head pipe / turbo assembly and remove the
shields.
19. Remove the fasteners
mounting bracket.
20. Remove the lower turbo bracket fasteners
remove the bracket from the vehicle.
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
a
retaining the oil inlet hose
s
.
d
retaining the heat shields to
f
retaining the turbo to the
g
© Copyright Polaris Industries Inc.
and
Chapters
Table of Contents
Troubleshooting
