Table of Contents
ENGINE / COOLING SYSTEM
11. Install the eight M10
lower crankcase bolts. Tighten all bolts lightly by
hand.
Install new M10 lower crankcase bolts.
12. Torque lower crankcase bolts in sequence to
specification. Repeat sequence to verify final torque.
TORQUE
Lower Crankcase Bolts:
M10 Bolts:
Step 1: 9 ft-lb (12 Nm)
Step 2: 21 ft-lb (28 Nm)
Step 3: Tighten add'n 90°
M8 Bolts:
26 ft-lb (35 Nm)
M6 Bolts:
9 ft-lb (12 Nm)
13. Rotate the engine so the cylinder is facing up.
3.92
y
u
, two M8
and one M6
NOTE
i
14. Install the eleven M6
crankcase bolts. Tighten all bolts lightly by hand.
15. Torque the upper crankcase bolts in sequence to
specification. Repeat the sequence to verify final
torque.
Upper Crankcase Bolts:
16. Rotate the engine so the cylinder is facing down.
17. Install a new seal on the oil pump.
18. Lift the oil pump drive chain and install the oil pump.
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
o
and two M8
TORQUE
M8 Bolts:
26 ft-lb (35 Nm)
M6 Bolts:
9 ft-lb (12 Nm)
© Copyright Polaris Industries Inc.
i
upper
Chapters
Table of Contents
Troubleshooting
