Table of Contents
2. Install the driven clutch retaining bolt. Torque bolt to
specification.
TORQUE
Driven Clutch Retaining Bolt:
70 ft-lbs (95 Nm)
3. With the clutch spreader tool
belt over the drive clutch and over part of the driven
clutch.
4. Rotate the driven clutch and walk the belt into the
clutch.
5. Remove the clutch spreader tool from driven clutch.
6. Rotate / spin the driven clutch and belt approximately
5-7 times to properly seat the belt in the driven clutch.
7. Install the outer clutch cover and screws. Torque
screws to specification.
TORQUE
PVT Cover Screws:
35 in-lb (3 Nm)
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
© Copyright Polaris Industries Inc.
q
installed , loop the
PVT SYSTEM
5
5.19
Chapters
Table of Contents
Troubleshooting
