Table of Contents
6. Carefully install the rollers
assembly while installing the assembly into the clutch
housing.
NOTICE
Install roll cage so the ring gear grooves line up with the
roll cage windows. Be sure roll cage top groove is
facing upward.
r
7. Install the springs
and spring retainer assembly
onto the ring gear.
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
© Copyright Polaris Industries Inc.
e
into the roll cage
8. Check the action of the springs by rotating in both
9. Install the armature plate
t
Verify armature plate tabs are in the roll cage slots and
directions to ensure the spring and retainer are
installed properly.
y
sure all of the armature plate tabs are fully engaged
into the roll cage assembly and that it is resting
properly on the spring retainer. Be sure the cage plate
is resting properly on the spring retainer, and all tabs
are fully engaged.
NOTICE
that it rests properly on the spring retainer.
FINAL DRIVE
u
and cage plate
. Be
7
7.39
Chapters
Table of Contents
Troubleshooting
