Table of Contents
STEERING / SUSPENSION
13. Install new upper A-arm assembly onto vehicle frame.
Torque new bolt to specification.
TORQUE
Front Upper A-arm Bolts:
70 ft-lbs (95 Nm)
14. Insert upper A-arm ball joint end into the bearing
carrier. Install upper ball joint pinch bolt into the
bearing carrier and torque bolt to specification.
TORQUE
Front Ball Joint Pinch Bolts:
40 ft-lbs (54 Nm)
15. Install the nut retaining the front stabilizer bar link to
the
upper
control
specification.
TORQUE
Stabilizer Bar Link Fasteners:
70 ft-lbs (95 Nm)
16. Attach shock to A-arm with fastener. Torque lower
shock bolt to specification.
TORQUE
Front Shock Mounting Bolts:
70 ft-lbs (95 Nm)
8.24
arm..
Torque
fasteners
FRONT STABILIZER BAR REPLACEMENT
REMOVAL
1. Remove the fasteners
bar link to the upper control arm.
to
2. Remove the Fasteners
mount to the frame.
3. Remove the fasteners
link to the stabilizer bar.
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
q
retaining the front stabilizer
w
retaining the stabilizer bar
e
retaining the stabilizer bar
© Copyright Polaris Industries Inc.
Chapters
Table of Contents
Troubleshooting
