Table of Contents
PROP SHAFT REMOVAL (S4)
1. If removing the front prop shaft, Locate the prop
q
shaft roll pin
and use the Roll Pin Removal Tool to
remove the roll pin. Discard roll pin. Push the front
prop shaft rearward to remove it from the front
gearcase input shaft.
Roll Pin Removal Tool:
2872608
NOTICE
Right front wheel can be removed to gain better access
to the prop shaft roll pin.
w
2. Remove the fasteners
and rear skid plates.
3. Remove the seats.
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
© Copyright Polaris Industries Inc.
retaining the front, middle,
e
4. Remove push rivets
retaining the center console. Push the rubber boots
around the seat belt buckles and the shifter through
the center console to remove the console.
5. Remove the three fasteners
shaft bearing isolator.
FINAL DRIVE
r
and the torx screws
t
retaining the prop
7.23
7
Chapters
Table of Contents
Troubleshooting
