Table of Contents
• Straight water or antifreeze may cause the system
to freeze, corrode, or overheat.
Polaris 60/40 Anti-Freeze / Coolant
(PN 2871323)
Cooling System Pressure Test
Refer to Chapter 3 for cooling system pressure test
procedure.
Cooling System Hoses
1. Inspect all hoses for cracks, deterioration, abrasion
or leaks. Replace if necessary.
2. Check tightness of all hose clamps.
CAUTION
Do not over-tighten hose clamps at radiator or radiator
fitting may distort.
Radiator hose clamp torque is 36 in-lbs (4 Nm).
Radiator
1. Check radiator (A) air passages for restrictions or
2. Carefully straighten any bent radiator fins.
3. Remove any obstructions with compressed air or low
Washing the vehicle with a high-pressure washer could
Coolant Drain
1. Remove the hood from the front cab.
Never drain the coolant when the engine and radiator
are warm or hot. Hot coolant can cause severe burns.
2. Slowly remove the pressure cap to relieve any
3. Place a suitable drain pan underneath the radiator
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
MAINTENANCE
damage.
pressure water.
CAUTION
damage the radiator fins and impair the radiators
effectiveness. Use of a high-pressure washer is not
recommended.
WARNING
Allow engine and radiator to cool.
cooling system pressure.
fitting on the front RH side of the vehicle.
2
2.25
Chapters
Table of Contents
Troubleshooting
