Table of Contents
7. Inspect the bendix bushing (C) in the mag cover for
wear. Replace as needed.
Flywheel / Stator Removal / Inspection
1. Remove stator cover bolts and remove stator cover.
2. Remove flywheel nut and washer.
3. Install Flywheel Puller (PN 2871043) and remove
Do not thread the puller bolts into the flywheel more
4. Use caution when removing the wire holddown (B)
5. Remove the bendix (E) if necessary.
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
flywheel (A).
CAUTION
than 1/4" or stator coils may be damaged.
and the stator assembly (D). Do not tap or bump
the gear /stator housing cover or the stator. This
could cause the seal around the gear/stator housing
cover and the crankcase to break, causing a leak.
ENGINE
3
3.43
Chapters
Table of Contents
Troubleshooting
