Table of Contents
5. Install a new pinion shaft seal using a standard seal
installer or other suitable method.
6. Install the original shim (s) previously removed onto
the appropriate sides of the differential assembly.
Install the bearings by hand as they are a slip-fit.
7. If previously removed; assembly the shift lever (A),
8. Carefully install the shift yoke assembly into the
9. Install the shift yoke assembly with the shift return
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
shift lever spring (B), shift return springs (C), shift
yoke (D), and lock pin bushing (E).
gearcase.
springs (C), facing down in the housing.
FINAL DRIVE
7
7.63
Chapters
Table of Contents
Troubleshooting
