Table of Contents
3. Remove the four screws that secure the cam (helix)
assembly using a T25 Torx driver.
4. Place the driven clutch into the Universal Clutch
Compressor PU-50518.
5. Press down on the top of the spider assembly,
6. Remove the spider assembly and spring (B).
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
pushing the spider onto the shaft. Remove snap ring
(A) and slowly release the assembly.
NOTE: Spring is compression only and has no
torsional wind.
CLUTCHING
6
6.29
Chapters
Table of Contents
Troubleshooting
