FINAL DRIVE
2. Remove
remaining
gearcase.
3. Remove the ring gear/axle spool assembly. The
bearings are a slip-fit and will slide off the axel spool.
NOTE: Record the thickness of the shim pack
located under each bearing. Keep the shims
together for reassembly.
7.46
cover
screws
from
rear
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
4. Inspect each axle spool bearing and race for signs of
wear or damage. Replace races if required using
standard bearing puller tools.