Table of Contents
7. Remove the dash assembly from the vehicle.
Front Fender Flair Removal
1. If dash is installed, remove the (2) push rivets that
attach the lower portion of the fender flair to the
rocker panels.
2. Remove the (6) push rivets (RZR) or (8) T27 Torx
screws (RZR-S/RZR-4) and remove fender flairs
from the dash assembly.
Rear Fender, Flair and Tie Down Removal
1. Remove
the
rear
COMPONENT REMOVAL - Rear Bumper").
2. Remove the push rivets that retain the rear portion of
the rocker panels to the rear fenders.
3. Remove the (3) push rivets (RZR) or (8) T27 Torx
screws (RZR-S / RZR-4) and remove the fender flair.
BODY / STEERING / SUSPENSION
bumper
(see
"BODY
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
4. Remove the (3) Torx screws from the bottom side of
the fender and the upper push rivet from the top side.
Remove the fender from the vehicle.
5. Remove the (4) fasteners that retain the tie-down
brackets to the cargo box and remove from vehicle.
Cargo Box Assembly Removal
1. Remove the seats and rear panel or cover (see
"Seats", "Rear Service Panel" or "Rear Console
Cover").
2. Remove the (4) Torx screws retaining the lower
portion of the rear bumper to the frame (see "Rear
Bumper").
3. Remove the (4) screws from the middle of the cargo
box.
4. Remove the (4) Torx screws that attach the front
portion of the cargo box to the frame.
5. Remove the (6) Torx screws and (2) push rivets that
attach the rocker panels to the cargo box on each
side.
6. Disconnect the taillight harness from the chassis
harness located above the airbox and remove the
cargo box assembly from the vehicle.
5
5.23
Chapters
Table of Contents
Troubleshooting
