Table of Contents
4. Lift bearing carrier into place and install the bolt
attaching the bearing carrier to the upper A-arm.
Torque fastener to specification.
Upper Rear Bearing Carrier Bolt:
RZR: 33 ft-lbs (45 Nm)
RZR S / RZR 4: 40 ft-lbs (54 Nm)
5. Apply grease to drive shaft axle splines.
6. Install rear wheel hub assembly, cone washers, and
hand tighten the castle nut. Install washers with
domed side out.
7. Install brake caliper mounting bolts and torque to
New bolts have a pre-applied locking agent which is
destroyed upon removal. Always use new brake caliper
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
specification.
Rear Caliper Mounting Bolts:
18 ft-lbs (24 Nm)
CAUTION
mounting bolts upon assembly.
FINAL DRIVE
7
7.43
Chapters
Table of Contents
Troubleshooting
