Table of Contents
Trip Meter
The trip meter records the miles traveled by the vehicle
on each trip. To reset the trip meter:
1. Toggle the MODE button to TRIP 1.
2. To reset to 0, push and hold the MODE button until
the distance display changes to 0.
Tachometer (RPM)
Engine RPM can be displayed digitally.
Engine Temperature
Engine temperature can be displayed in ° F or ° C. Refer
to "Units of Measurement" to change the format.
Engine Hours
Engine hours are logged anytime the engine is running.
Total hours can not be reset.
Programmed Service Interval
The initial factory service interval setting is 50 hours.
Each time the engine is started, the engine hours are
subtracted from the service interval hours. When the
service interval reaches 0, the LCD wrench icon will flash
for approximately 10 seconds each time the engine is
started.
To change the hour setting or reset the function, follow
these steps:
1. Toggle the MODE button until the wrench icon is
2. Press and hold the MODE button until the information
3. Toggle the MODE button to increase the service
4. To turn off the service interval function, toggle the
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
displayed in the information area.
display area begins to flash.
interval hours in 5 hour increments to a maximum of
100 hours.
MODE button until "OFF" is displayed.
ELECTRICAL
10
10.15
Chapters
Table of Contents
Troubleshooting
