Table of Contents
5. Install front wheel hub assembly, cone washers, and
hand tighten the castle nut. Install washers with
domed side out.
6. Install brake caliper and mounting bolts. Torque bolts
to specification.
Front Caliper Mounting Bolts:
31-34 ft-lbs (42-46 Nm)
CAUTION
New bolts have a pre-applied locking agent which is
destroyed upon removal. Always use new brake caliper
mounting bolts upon assembly.
7. Install the steering tie rod end onto the front bearing
8. Torque the tie rod end fastener to specification and
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
carrier.
NOTE: Refer to the photos below to ensure
proper placement of the tie rod end.
install a new cotter pin.
Tie Rod End Fastener:
42.5 ft-lbs (58 Nm)
FINAL DRIVE
7
7.7
Chapters
Table of Contents
Troubleshooting
