Table of Contents
14. Remove the four fasteners
pipe to the turbocharger.
15. Remove the exhaust pipe from the chassis.
o
16. Remove the two hoses
boost control valve.
a
17. Remove the banjo bolt
and remove the oil drain hose
IMPORTANT
The oil line sealing washers MUST be replace any time
the oil line/fitting is removed. Use only the
recommended washers shown in the Polaris Electronic
Parts Catalog.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
© Copyright Polaris Industries Inc.
u
retaining the exhaust
from the turbo going to the
retaining the oil inlet hose
s
.
ENGINE / COOLING SYSTEM
d
18. Remove the fasteners
retaining the heat shields to
the head pipe / turbo assembly and remove the
shields.
f
19. Remove the fasteners
mounting bracket.
20. Remove the lower turbo bracket fasteners
remove the bracket from the vehicle.
21. Remove the six fasteners
to the cylinder head.
22. Slide the head pipe off the studs and remove the
head pipe/turbo from the vehicle.
retaining the turbo to the
g
and
j
retaining the head pipe
3.43
3
Chapters
Table of Contents
Troubleshooting
