Table of Contents
STEERING / SUSPENSION
FOX internal bypass shocks are position sensitive and become progressively stiffer as the suspension compresses. To
maintain the intended ride comfort, it is important that ride height is maintained to the factory setting.
Adding extra weight to the vehicle will decrease ride height and cause the shock to operate in the stiffer bypass zones.
To correctly compensate for added cargo or accessory weight, spring preload should be added to keep the shock in
the optimal zone and maintain ground clearance.
Refer to the following adjustment table to correctly compensate for weight added to the vehicle.
These settings are only guidelines. The spring preload and shock clickers can be adjusted further to match personal
RIDERS
Driver Only
Driver +1
Driver +1
Driver +1
Driver +1
* shaded cells are factory default settings
8.24
riding style and location of the weight on the vehicle.
FOX Internal Bypass Shock Adjustments
CARGO +
ACCESSORIES
ADJUSTMENT
Remove 0.2" (5 mm)
0
preload, front and
Factory default
0
Add 0.2" (5 mm)
100 lbs (45 kg)
preload, front and
Add 0.4" (10 mm)
200 lbs (91 kg)
preload, front and
Add 0.6" (15 mm)
300 lbs (136 kg)
preload, front and
NOTE
SPRING
FRONT SHOCK
16 clicks out
rear
12 clicks out
10 clicks out
rear
8 clicks out
rear
6 clicks out
rear
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
REAR SHOCK
16 clicks out
12 clicks out
10 clicks out
8 clicks out
6 clicks out
© Copyright Polaris Industries Inc.
Chapters
Table of Contents
Troubleshooting
