Table of Contents
BODY / FRAME
4. Adjust the door until the front latch is centered both
vertically and horizontally in the striker bracket, as
shown.
If it is difficult to center vertically and horizontally, loosen
striker assembly fasteners
Torque striker fasteners once aligned.
TORQUE
Striker Fasteners:
8 ft-lb (11 Nm)
5. Holding the door in position, tighten the top hinge
bracket M8 fasteners
r
. Torque to specification.
TORQUE
Door Hinge Fasteners:
8 ft-lb (11 Nm)
6. Install the door panel onto the door frame. Torque
fasteners to specification.
10.22
NOTE
w
for extra adjustment.
e
and then bottom fasteners
TORQUE
Door Panel Fasteners:
22 in-lb (2 Nm)
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
© Copyright Polaris Industries Inc.
Chapters
Table of Contents
Troubleshooting
