Table of Contents
2. With the transmission in Park, start the engine. After
a few seconds, the fan should start running and the
"Check Engine" indicator should display on the
instrument
cluster.
This
components are working properly.
3. If the fan does not run or runs slowly, check the fan
motor wiring, ground, motor condition, circuit breaker
and mechanical relay for proper operation. Repair or
replace as necessary. If the fan runs with the sensor
harness disconnected, but will not turn on when the
engine is hot, check the coolant temperature sensor
and connector terminals.
COOLING FAN REPLACEMENT
1. Remove the hood panel.
2. Disconnect the front headlight harnesses
sides and the two voltage regulator harness
w
connections
.
3. Remove the zip ties on both sides retaining the
headlight harnesses.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
© Copyright Polaris Industries Inc.
4. Remove the two fasteners
indicates
all
other
5. Remove the two fasteners
q
on both
6. Disconnect the fan harness.
7. Disconnect the front gearcase breather hose
e
regulator bracket and remove the bracket.
radiator bracket.
the fan shroud.
ELECTRICAL
retaining the voltage
r
retaining the upper
i
from
11
11.45
Chapters
Table of Contents
Troubleshooting
