Configuring The Web Server; Performing The Basic Configuration - Siemens SINAMICS S120 Function Manual
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Basic functions
6.28 Web server
6.28.3
Configuring the Web server
6.28.3.1
Performing the basic configuration
The configuration of the Web server is performed via the "Configure Web Server" dialog box
of STARTER. Basically, the configuration can be performed in online mode as well as in
offline mode of STARTER.
Alternatively, you can also configure the Web server via the expert list using the appropriate
parameters. The configuration parameters for the Web server can be found in the SINAMICS
S120/S150 List Manual. Parameter p8986 activates the Web server.
Calling the configuration dialog of the Web server
1. Select the required drive in the project navigator.
2. Call the "Web server" context menu.
Default settings of the Web server
The Web server is activated per default in the configuration.
Figure 6-25
378
The "Web Server Configuration" dialog box then opens.
Configuring the Web server with default settings
Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3
Drive functions
- Quick Links:
- Active Infeed
Hide quick links:
Table of Contents
