Uploading From The Cpu; Copying Elements Of The Project - Siemens S7-1200 System Manual
Hide thumbs
Also See for S7-1200:
- Operating instructions manual (132 pages) ,
- Programming manualline (74 pages) ,
- Manual (46 pages)
Table of Contents
6.8
Uploading from the CPU
6.8.1
Copying elements of the project
You can also copy the program blocks from an online CPU or a memory card attached to
your programming device.
Prepare the offline project for the copied program blocks:
1. Add a CPU device that matches the online CPU.
2. Expand the CPU node once so that the "Program
To upload the program blocks from the online CPU to the
offline project, follow these steps:
1. Click the "Program blocks" folder in the offline project.
2. Click the "Go online" button.
3. Click the "Upload" button.
4. Confirm your decision from the Upload dialog
As an alternative to the previous method, follow these
steps:
1. From the project navigator, expand the node for
2. Expand the node for the network, and double click
3. Expand the node for the CPU.
4. Drag the "Program blocks" folder from the online CPU
5. In the "Upload preview" dialog, select the box for
When the upload is complete, all of the program blocks,
technology blocks, and tags will be displayed in the offline
area.
S7-1200 Programmable controller
System Manual, 03/2014, A5E02486680-AG
blocks" folder is visible.
(Page 786).
"Online access" to select the program blocks in the
online CPU:
"Update accessible devices".
and drop the folder into the "Program blocks" folder of
your offline project.
"Continue", and then click the "Upload from device"
button.
Programming concepts
6.8 Uploading from the CPU
197
Table of Contents
