Configuring Web Server Users - Siemens S7-1200 System Manual
Hide thumbs
Also See for S7-1200:
- Operating instructions manual (132 pages) ,
- Programming manualline (74 pages) ,
- Manual (46 pages)
Table of Contents
Web server
11.2 Configuring Web server users
If you created and enabled user-defined Web pages (Page 625), you can access them from
the standard Web page menu.
Note
Device exhange: replacing a V3.0 CPU with a V4.0 CPU and project conversion
If you replace an existing V3.0 CPU with a V4.0 CPU (Page 995) and convert your V3.0
project to a V4.0 project, note that STEP 7 and the V4.0 CPU retain the Web server settings
for
• "Activate web server on this module"
• "Permit access only with HTTPS"
Note
If a "Download in RUN" (Page 803) is in progress, standard and user-defined Web pages do
not update data values or permit you to write data values until the download is complete. The
Web server discards any attempts to write data values while a download is in progress.
Enabling other languages for the Web server
You can also optionally select other languages for the display of the standard Web pages.
Select "User interface languages" from the Properties tab of your device configuration, and
you can then assign a STEP 7 project language to one of the six languages that the Web
server supports. After you download the device configuration, the standard Web pages
provide a selector for the user interface language. If you do not select any languages, the
default is English.
11.2
Configuring Web server users
You can configure users with various privilege levels for accessing the CPU through the Web
server.
To configure Web server users and their associated privileges, follow these steps:
1. Select the CPU in the Device Configuration view.
2. In the inspector window, select "Web server" from the CPU properties and enable the
Web server (Page 603).
3. Select "User management" in the Web server properties.
4. Enter user names, access levels, and passwords for the user logins that you want to
provide.
After you download the configuration to the CPU, only authorized users can access Web
server functions for which they have privileges.
604
S7-1200 Programmable controller
System Manual, 03/2014, A5E02486680-AG
Table of Contents
