Table of Contents
Auto (PS)
Color
mode
Graphi
Text
cs
Black
7360-0
7361-0 7362-0 7363-0 7364-0 7365
(600dpi)
7360-1
7361-1 7362-1 7363-1 7364-1 7365-
7360-2
7361-2 7362-2 7363-2 7364-2 7365-
Auto (XPS)
Color
Graphi
mode
Text
cs
Black
7366-0
7367-0
(600dpi)
7366-1
7367-1
7366-2
7367-2
Notes:
•
Be sure that this adjustment be made after performing P. 6-49"6.3.1 Automatic gamma
adjustment".
•
Changing the adjustment setting influences the adjacent density area slightly.
E.g.: When the value of the medium density is larger, the adjacent areas in the low density and
high density range will become slightly darker.
•
The adjustment item can be changed by the setting value of code 05-8066; however, the
maximum density may not appear as high even when High density / Maximum density is set to
high if "1" is set for "05-8066".
(1)
While pressing [0] and [5] simultaneously, turn the power ON.
(2)
Key in the codes to be adjusted (language and screen) and press the [START] button.
(3)
Key in the value corresponding to the density area to be adjusted (0, 1 or 2) and press the
[START] button.
0: Low density 1: Medium density 2: High density/Max density
(4)
Key in the adjustment value. (To correct the value once keyed in, press the [CLEAR] button.)
Press the [OK] or [INTERRUPT] button to store the value in memory. The equipment goes
(5)
back to the ready state.
(6)
For resetting the value, repeat step (2) to (5).
(7)
Let the equipment restart and perform the printing job.
(8)
If the image density has not been attained, repeat step (1) to (7)
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Auto (PCL)
Graphi
Image
Text
cs
Item to be adjusted
When "0"
When "1"
is set for
is set for
Image
"05-
"05-
8066"
8066"
7368-0
Low
Low
density
density
7368-1
Medium
Medium
density
density
7368-2
High
High
density
density /
Maximum
density
6 - 53
Item to be
adjusted
When
When
"0" is
"1" is
Image
set for
set for
"05-
"05-
8066"
8066"
-0
Low
Low
density
density
1
Medium
Medium
density
density
2
High
High
density
density /
Maximu
m
density
Remarks
The larger the value is, the density
of the item to be adjusted becomes
darker.
Acceptable values: 0 to 255
(Default: 128)
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SETTING ADJUSTMENT
Remarks
The larger
the value is,
the density
of the item to
be adjusted
becomes
darker.
Acceptable
values: 0 to
6
255
(Default:
128)
- Quick Links:
- Service Manual
Hide quick links:
Table of Contents
Troubleshooting
