Table of Contents
4.5
Paper Feeding System
4.5.1
Bypass feed tray
(1)
Take off the duplexing unit front cover.
P. 4-5"4.1.13 Duplexing unit front cover"
(2)
Take off the duplexing unit rear cover.
P. 4-5"4.1.14 Duplexing unit rear cover"
(3)
Disconnect 1 connector and remove 1 screw.
(4)
Lift up the hinge slightly and then take off the
bypass tray.
Notes:
When installing or taking off the bypass tray,
keep it setting up because it is tensed with a
spring.
4.5.2
Bypass feed unit
(1)
Take off the bypass feed tray.
P. 4-45"4.5.1 Bypass feed tray"
(2)
Open the duplexing unit.
(3)
Remove 1 screw and take off the SFB lower
cover.
Notes:
When the optional LCF is installed, be sure
to install the cover with the duplexing unit
opened wider than the LCF.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-126
Fig. 4-127
SFB lower cover
Fig. 4-128
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 45
Connector
Bypass feed tray
DISASSEMBLY and REPLACEMENT
4
- Quick Links:
- Service Manual
Hide quick links:
Table of Contents
Troubleshooting
