Table of Contents
(4)
Enter the user name and password on the SERVICE TECHNICIAN PASSWORD screen, then
press [OK]. They are set by default as follows:
User Name
Password
The SERVICE MODE screen is displayed.
[ 2 ] In the security mode
If the security mode (the value of 08-8911 is "3") is set, log into Service UI following the steps below.
(1)
Turn the power ON.
(2)
Enter the user name and password on the USER AUTHENTICATION screen. The password
needs to be changed to log in for the first time.
Notes:
In case the password is forgotten, ask the administrator to reset the service password. In case
both the service password and administrator password are forgotten, the passwords can be reset
in the password reset mode. Note that the user data are deleted at that time.
(3)
Press the [USER FUNCTIONS] button.
(4)
Enter the password for Service UI on the USER FUNCTIONS screen. The SERVICE MODE
screen is displayed.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SELF-DIAGNOSTIC MODE
Service
None
Fig.5-3
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
5 - 6
- Quick Links:
- Service Manual
Hide quick links:
Table of Contents
Troubleshooting
