4.9.22
IH board (IH)
(1)
Open the SYS board case.
P. 9-2"9.1.3 SYS board case"
(2)
Take off the IH board cover and the harness
of the IH coil.
P. 4-197"4.9.16 IH coil"
(3)
Disconnect 3 connectors from the IH board
[1].
(4)
Remove 5 screws and take off the IH board
[1].
4.9.23
Fuser unit jam releasing LED (LED)
(1)
Take off the right corner cover.
P. 4-8"4.1.22 Right corner cover"
(2)
Open the front cover and pull out the bridge
unit.
(3)
Remove 2 screws and then take off the inner
cover.
(4)
Remove 1 screw and disconnect the
connector to take off the LED bracket.
(5)
Remove 1 screw and then take off the fuser
unit jam releasing LED [1].
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
[ 1 ]
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
4 - 204
Fig. 4-591
Fig. 4-592
[ 1 ]
Fig. 4-593