Table of Contents
Check item
Setting
Replace parts
HDD
[F140] ASIC format error
Classification
Other service call
Check item
SYS board
Main memory
Replace parts
SYS board
Main memory
[F200] Data overwrite option (GP-1070) disabled
Classification
Other service call
Check item
Firmware
Replace parts
SYS board
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
1. Check the bad sector of the HDD (08-9072). If the result is
"NG", replace the HDD.
Notes:
It may take more than 30 minutes to finish the
checking.
2. Perform [3] + [C] + [POWER] -> [3], and then reinstall the
HDD software.
Notes:
User data will be deleted when [3] + [C] + [POWER] ->
[3] is performed.
ASIC formatting fails or memory acquiring fails when software
is formatted
•
Connector check
•
Board check
•
Check the installation
•
Main memory check
•
Perform firmware installation (all firmware: OS, HDD,
SYS, PFC Firmware, Engine Main Firmware, and Scanner
Firmware) with the USB media.
Remarks:
When the function of the Data Overwrite option (GP-
1070) is deleted from the equipment, the service call
"F200" occurs
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
8 - 207
Measures
Remarks
Error item
Measures
Remarks
Error item
Measures
Remarks
ERROR CODE and TROUBLESHOOTING
8
- Quick Links:
- Service Manual
Hide quick links:
Table of Contents
Troubleshooting
